DS-320SA Dual-Miter Semi-Automatic Band Saw

Machine Details & Specs:

• Operator Control Console - Control console can be positioned for operator comfort and safety insuring hands are away from the blade at band start.
• Mitsubishi Touch Screen Panel - The touch screen control panel displays cutting cycle indicator, blade tension indicator, BRP (overfeed protection) function, band speed, band drive amp load, and a list of error messages allowing the operator to monitor machine functions.
• Direct Driven Band Drive - Drive is comprised of an electric VFD controlled motor transferring power through a gear reduction unit directly to the drive wheel eliminating belt slippage and giving positive torque to the blade.
• Semi-Automatic Cycle - Programmable cycle allows the operator the ability to control hydraulic on-off, saw head movement after the cut, head raise limit through material height sensor, band drive on-off, and vise clamp-unclamp after the cut maximizing productivity.
• Automatic Overload Feed Protection - BRP function monitors band drive motor amperage stopping head fall when operator set parameter is reached signaling overfeed or a dull saw band.
• Band Wheels - Cast steel wheels insure band tracking and long life. Lay back head design minimizes band twist which causes band fatigue and also allows a smaller foot print.
• Hydraulic Clamping Vise-Two position, short stroke, hydraulic vise can be positioned on either side of band allowing maximum clamping close to the cut line eliminating material movement and tooth strippage.
• Manual Blade Tension-Illuminating indictor prevents possible error of over/under
  tightening the band for maximum cutting rates and band life.
• Band Brush-Driven band brush removes the chips from the blade gullets which would prevent the blade from attaining maximum cutting rates and blade life.
• Counter Balance Spring-Counterbalance springs maintain constant head weight throughout the cut keeping the blade tooth load equal aiding in maximum blade life.

Saw blade:

• Width x Length - 1" x 144"

Band drive:

• Motor HP – 3 Hp
• Band Speed – 65-325 fpm
• Band Tension – Manual

Hydraulic system:

• Motor Hp - .7 Hp
• Reservoir Size - 2.5 Gallon

Indexer:

• Length per Stroke - N/A
• Maximum Index Strokes Length - N/A
• Remnant Length - N/A

Coolant:

• Flood coolant & mist coolant
• Motor Hp - .17 Hp
• Reservoir Size 4 Gallon

Floor space dimensions:

• W x L X H - 64" x 35" x 74"
• Material Pass Height - 31.5"
• Machine Weight - 618 lbs.

Electrical

• Voltage Requirement - 230V-60Hz-3ph, Wye configuration
• Total Amp Draw (FLA) 8 Amps