DS-600SA Dual-Miter Semi-Automatic Band Saw

Details:

• Operator Control Console - Control console can be positioned for operator comfort and safety insuring hands are away from blade at band start.
• Mitsubishi Touch Screen Panel - The touch screen control panel displays the cutting cycle indicator, blade tension indicator, BRP (overfeed protection) function, band speed, head angle, band drive amp load and a list of error messages allowing the operator to monitor machine functions.
• Saw Head Design - The robust head is mounted at a 2-degree slope which decreases tooth load at the end of the cut increasing band life.
• Direct Driven Band Drive - Drive is comprised of an electric VFD controlled motor transferring power through a gear reduction unit directly to the drive wheel eliminating belt slippage and giving positive torque to the blade.
• Semi-Automatic Cycle - Programmable cycle allows the operator the ability to control hydraulic on-off, saw head movement after the cut, head raise limit through programmable set point, band drive on-off, and vise clamp-unclamp after the cut maximizing productivity.
• Automatic Overload Feed Protection - BRP function monitors band drive motor amperage stopping head fall when operator set parameter is reached signaling overfeed or a dull saw band. Band Wheels - Cast steel wheels insure band tracking and long life.
• Hydraulic Clamping Vise - Full stroke, hydraulic vise can be positioned on either side of band allowing maximum clamping close to the cut line eliminating material movement and tooth strippage.
• Hydraulic Blade Tension - Illuminating indicator prevents the possible error of over/under-tightening the band for maximum cutting rates and band life.
• Band Brush - Driven band brush removes the chips from the blade gullets which would prevent the blade from attaining maximum cutting rates and blade life.
• Counter Balance Spring - Counter balance springs maintain constant head weight throughout the cut keeping the blade tooth load equal aiding in maximum blade life.
• Head Turn Table - Manual position of the saw head is accomplished by releasing the lock mechanism and rotating the head to the desired angle monitored on the digital display.
• Warranty - One-year parts only subject to terms and conditions. Optional 10-year warranty with DoALL Cut Above 10 Year Warranty

Specs:

Saw Blade:

• Width x Length - 1 1/2" x 212"

Band Drive:

• Motor HP - 5 Hp
• Band Speed 65-328 fpm
• Band Tension – Hydraulic

Hydraulic System:

• Motor Hp - 1 Hp
• Reservoir Size 3 Gallon

Coolant system:

• Flood coolant & Mist Lubricator
• Motor Hp - .07 Hp
• Reservoir Size – 5 Gallons

Indexer:

• Length Per-Stroke – NA
• Maximum Index Strokes Length – NA
• Remnant Length – NA

Floor Space Dimensions:

• W x L X H - 136" x 45" x 65"
• Material Pass Height - 31.5"
• Machine Weight - 2,646 lbs.

Electrical:

• Voltage Requirement - 460V-60Hz-3ph, Wye configuration
• Total Amp Draw (FLA) - 9 Amps